Move each stick, trim, switch and knob on cue while the transmitter records a telemetry log. The page keeps its own timeline; send it together with the log file, and TLMscope learns which value in the log belongs to which control.
Keys: Space starts or pauses, → skips, ← goes back. Voice and beeps let you keep your eyes on the transmitter.
Power off the model first, then the transmitter, so the log file closes. Then copy the run log below and send it with the log file (on a Spektrum NX: 002~<model>_<date>.TLM) to whoever asked you for this test, or get in touch through the Feedback button on tlmscope.andreasknoor.com.
Filled while the run goes. It holds the clock time of every step, so it can be matched with the log file. Nothing is sent anywhere.
Tell the page how your transmitter is laid out. The transmitter on the left follows what you set here.
Switch positions: up = away from you, down = towards you. Set each switch as it is right now. “What it does” helps the analysis (for example “throttle hold”, “flight mode”). Settings are kept in this browser.
| Switch | Kind | Now in | What it does |
|---|
| Use | Knob, slider or lever |
|---|
Tick every item. The run can only start when all are done.
During the run, use Pause, Skip and Back next to the transmitter. The voice tells you each step.
The run is going. The setup is locked; “New setup” unlocks it.